Explore Jig, Wood and more!

Mortise jig

Mortise jig

Machine Floor Locks Anyone with a machine on wheels— especially a tablesaw or planer— understands the necessity of locking it in place before using it. I use a pair of toggle clamps connected to rods. I position the machine where I want it and lock the toggle clamps down, as shown above. To keep the tool level, threaded rods adjust the clamp height so the wheels barely leave the …

AW Extra 5/3/12 - Machine Floor Locks

Machine Floor Locks Anyone with a machine on wheels— especially a tablesaw or planer— understands the necessity of locking it in place before using it. I use a pair of toggle clamps connected to rods. I position the machine where I want it and lock the toggle clamps down, as shown above. To keep the tool level, threaded rods adjust the clamp height so the wheels barely leave the …

#643 Router Dado Jig Plans - Joinery Tips, Jigs and Techniques http://woodarchivist.com/643-router-dado-jig-plans/ Tags: #Dado, #DadoJoint, #DadoJointJig, #Woodworking, #Woodwork, #WoodworkingPlans

Router Dado Jig Plans

#643 Router Dado Jig Plans - Joinery Tips, Jigs and Techniques http://woodarchivist.com/643-router-dado-jig-plans/ Tags: #Dado, #DadoJoint, #DadoJointJig, #Woodworking, #Woodwork, #WoodworkingPlans

The best tools don't need to be expensive - but often they are.

The best tools don't need to be expensive - but often they are.

For those occasions when you need a stable way to hold a board on its edge, turn to a tool that’s as old as woodworking itself—the wedge. I fashioned the wedge stands shown at right from scraps of 2x6 and a 3/8x6" bolt and nut. To make the stand, cut a 7"-long chunk from the 2x6 and drill a 1/2" hole centere d 2 1/4" from the edge and 1 3/4" up from the bottom. This hole reduces the likelihood of the stand splitting once the wedge is cut out. Mark the cutlines for the wedge as shown in the

For those occasions when you need a stable way to hold a board on its edge, turn to a tool that’s as old as woodworking itself—the wedge. I fashioned the wedge stands shown at right from scraps of 2x6 and a 3/8x6" bolt and nut. To make the stand, cut a 7"-long chunk from the 2x6 and drill a 1/2" hole centere d 2 1/4" from the edge and 1 3/4" up from the bottom. This hole reduces the likelihood of the stand splitting once the wedge is cut out. Mark the cutlines for the wedge as shown in the

Build this Downdraft Sanding Table and cut down the dust in your shop!  Full tutorial at FixThisBuildThat.com

How to Build a DIY Downdraft Table

Build this Downdraft Sanding Table and cut down the dust in your shop! Full tutorial at FixThisBuildThat.com

Wow...! To easy to make...! Sand block Wow...! Tan fácil de hacer...!

Wow...! To easy to make...! Sand block Wow...! Tan fácil de hacer...!

Haga clic para ampliar - subbase Router añade bordes redondeados a las puertas del panel

Haga clic para ampliar - subbase Router añade bordes redondeados a las puertas del panel

Pinterest
Search