Explore Machinist Tools, Cnc, and more!

Explore related topics

Surface Gage-100_0623.jpg

Surface Gage

I built this gage to use as a primary height and square gage, not as a surface gage, I have dedicated surface gages but I wanted to have a dedicated

Surface Gage

Surface Gage

Layout Tools 3069 For scribing lines, use on a surface plate;

Balancing Arbor by rossbotics -- I made this arbor for balancing the grinding wheels that fit my surface grinder. I put on a new wheel and discovered I had quiet a bit of vibration like I had not before, I checked the bearings, spindle run out ETC.  I didn't want to toss the wheel so I made a balancing arbor for the grinder.   The arbor was made from 1" O.D. 4140 preheat treated steel. Both ends of the arbor was machined in one setting, Meaning the arbor was not machined on one end then...

I made this arbor for balancing the grinding wheels that fit my surface grinder. I put on a new wheel and discovered I had quiet a bit of vibration

Dial Gauge Mill Tramming Tool

Dial Gauge Mill Tramming Tool

This Surface gage has a Hardened fine pitch screw with large adjustment knob for precise control.

Hermann Schmidt High Precision Work Holding Tools Product List

This Surface gage has a Hardened fine pitch screw with large adjustment knob for precise control.

Fireball Tool welder machinist squares assists with clamping your project as you make that important tack weld

Fireball Tool welder machinist squares assists with clamping your project as you make that important tack weld

Homemade compact radial bender fabricated from steel. Capable of bending 1" flat stock of up to 1/4" thickness. Accommodates nine mandrels allowing for a range of achievable bend radii from 1/4" to 1".

Compact Radial Bender Homemade compact radial bender fabricated from steel. Capable of bending flat stock of up to thickness. Accommodates nine mandrels allowing for a range of achievable bend radii from to

Pinterest
Search