Genius. I got a 4x8 sheet of half-inch plywood cut into thirds at Home Depot to end up with 3 pieces of 32x48" -- a good size to fill the empty wall in the dining room. With one-inch spacing, it gave me 32x48 pixels. I scaled down a world map to that size and posterized it to 5 colors (white + 4 shades of gray).
Goodbye old refrigerator and hello beauty! DIY Refrigerator makeover Items needed: -6 ft cedar dog eared fence boards -1/2 inch plywood -Hardware -polyurethane spray can: clear satin 1. Cut plywood to fit on top of frig. 2. Cut fence boards to size and nail to plywood on top of frig, use screws to secure to frig 4. Remove all hardware including water/ice dispenser. 5. Cut remainder of ply wood into 2 inch trim. 6. Attach trim with small nails 7. Spray polyurethane 8. Add hardware.
save on space by turning a bookcase into a desk here s how, painted furniture, repurposing upcycling, I had a piece of plywood cut to size careful to measure to the appropriate depth for comfortable leg room Then it was attached using wood glue to the the shelf Be sure you adjust the shelf to the right height
Mirror I tiled :0) We removed a builders mirror in a bathroom remodel. I had a 3 quarter inch plywood cut to size at Home Depot. Used mirror glue to attach the mirror. The small tiles on the mesh were perfect I let one row fall to the side to make a nice edge. Used the same glue to put the tiles on the mirror and grouted.
Octagon Dog/Cat Bed – This project was created from an old octagonal window my Mom had leftover from a renovation. Using a saw, I removed the front section and repaired the splintered pieces using wood glue and filler. Then the wood was sanded and painted. For the cushion, I had a 3/8” piece of plywood cut to size at my local hardware store. I cut a piece of 1” foam the same shape and wrapped both in durable fabric using 1/4” upholstery nails. *TIP* Use pliers to hold nails while hammering.
#Bedroom, #Headboard, #PalletHeadboard, #RecyclingWoodPallets Update your boring bedroom and add a personal touch with this lovely Queen-Sized Pallet Headboard and don't spend a single penny! Queen-Sized Pallet Headboard: To begin, we cut a piece of plywood as the backing and used two pallet stringers as
Right Angle Braces - Wood Mag Tip of the Day For each pair, start with a 12″ square of 3⁄4″ Baltic-birch plywood and cut it in half diagonally. Then cut notches for the clamps, above. You can vary sizes to suit larger or smaller projects. The braces help with more than glue-ups. Clamp a pair to a chest, above, to support the lid as you install hinges.
PatTurn . The two different size gears are in a ratio of 3:4, causing the larger gears to rotate 75% as fast as the smaller gears. So it takes 3 full turns of the larger gear for the pattern to repeat itself. (Laser-cut plywood, paint) #JohnEdmark #MechanicalArt #MathArt #GeometryArt #Turning #Gears #PatternDesign #Grids #RepeatPattern #KineticArt #InteractiveArt #BlackAndWhite