Electro Magnetic Flow Meter - Ms FL 0117  Specification Media : Liquids Viscosity  Process Temperature : 100°C max Process Pressure : 10 kg/cm2 Material of Construction of Sensor : Hastelloy C / SS 316L Body : Ms/CS Wetted Parts : Ms/CS Power Supply : 230 VAC, 50Hz ±10% Power Consumption : <10 VA Response Time : <100 Ms Temperature Coefficient : ±0.01% /ºC Transmitter Enclosure : IP 65 Process Connections : Flanged ASA #150 Operating Conditions : Temp 0~55ºC / Humidity 5~95% non-condensing

Electro Magnetic Flow Meter - Ms FL 0117 Specification Media : Liquids Viscosity Process Temperature : 100°C max Process Pressure : 10 kg/cm2 Material of Construction of Sensor : Hastelloy C / SS 316L Body : Ms/CS Wetted Parts : Ms/CS Power Supply : 230 VAC, 50Hz ±10% Power Consumption : <10 VA Response Time : <100 Ms Temperature Coefficient : ±0.01% /ºC Transmitter Enclosure : IP 65 Process Connections : Flanged ASA #150 Operating Conditions : Temp 0~55ºC / Humidity 5~95% non-condensing

Flow-enhanced design with a drag coefficient of 0.25; a powerful, all-electric e-tron quattro drive with up to 370 kW – Audi is presenting the Audi e-tron quattro concept at the International Motor Show (IAA) 2015 in Frankfurt. The car is the company’s statement about the future of electric mobility: It is sporty, efficient and suitable for everyday use.

Flow-enhanced design with a drag coefficient of 0.25; a powerful, all-electric e-tron quattro drive with up to 370 kW – Audi is presenting the Audi e-tron quattro concept at the International Motor Show (IAA) 2015 in Frankfurt. The car is the company’s statement about the future of electric mobility: It is sporty, efficient and suitable for everyday use.

Top: Pressure Coefficient. Bottom: Skin Friction Drag. Aerodynamic analysis with SolidWorks Flow Simulation. Road testing from 2013 gave us confidence that we can achieve a laminar boundary layer to the point of minimum pressure (shown in the top picture with the darkest blue colour). Laminar flow isn’t easy to achieve or to simulate, but the picture below shows the difference in skin friction drag between the laminar and turbulent regions (where it jumps from blue to green).

ETA: A First Look at the New Design

Top: Pressure Coefficient. Bottom: Skin Friction Drag. Aerodynamic analysis with SolidWorks Flow Simulation. Road testing from 2013 gave us confidence that we can achieve a laminar boundary layer to the point of minimum pressure (shown in the top picture with the darkest blue colour). Laminar flow isn’t easy to achieve or to simulate, but the picture below shows the difference in skin friction drag between the laminar and turbulent regions (where it jumps from blue to green).

Objective: (i) For ascertaining the coefficient of expulsion (Cd) of the specified notch for diverse

Objective: (i) For ascertaining the coefficient of expulsion (Cd) of the specified notch for diverse

Factorising polynomials with a coefficient of x^2 and no HCF. This is an alternative to using the grid method and is also the way I use but laid out nicely so students can follow. I think I prefer it because the grid method is a bit of a magic box in that it is not clear why it works and I think it's really important to avoid that.

Factorising polynomials with a coefficient of x^2 and no HCF. This is an alternative to using the grid method and is also the way I use but laid out nicely so students can follow. I think I prefer it because the grid method is a bit of a magic box in that it is not clear why it works and I think it's really important to avoid that.

28.88$  Watch here - https://alitems.com/g/1e8d114494b01f4c715516525dc3e8/?i=5&ulp=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F18KW-air-source-high-coefficient-heat-pump-water-heater-under-15-C-outside-temp-for-household%2F32613981180.html - RTBT-3 bi-flow thermostatic expansion valves with solder connection tube is used for  heat pump equipment 28.88$

28.88$ Watch here - https://alitems.com/g/1e8d114494b01f4c715516525dc3e8/?i=5&ulp=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F18KW-air-source-high-coefficient-heat-pump-water-heater-under-15-C-outside-temp-for-household%2F32613981180.html - RTBT-3 bi-flow thermostatic expansion valves with solder connection tube is used for heat pump equipment 28.88$

Magnetic Implosion Transformer by Graham Gunderson – This presentation shows a solid state transformer invented by Graham that measured out at 570% more output than the input he had to pay for at a live demonstration. He can even dial the input down so the input goes negative, which means the COP (coefficient of performance) is infinite (ratio between intended work compared to input we paid for.

Magnetic Implosion Transformer by Graham Gunderson – This presentation shows a solid state transformer invented by Graham that measured out at 570% more output than the input he had to pay for at a live demonstration. He can even dial the input down so the input goes negative, which means the COP (coefficient of performance) is infinite (ratio between intended work compared to input we paid for.

Vaporesso Attitude 80W TC Starter Kit - What''s Included:1 x Vaporesso Attitude Starter Kit1 x 0.5 ohm Clapton Traditional Coil1 x 4ml Glass Segment Reservoir Extender1 x Spare O-Ring Kit1 x Micro USB Cable1 x User ManualSpecs & FeaturesSingle High Amp 18650 Batteries - Not IncludedMaximum Wattage Output : 5-200WTemperature Control Range: 280-600FMin Atomizer Resistance: 0.05ohmVaporesso OMNI Board ChipsetSupport Nickel, Titanium, and Stainless Steel Heating ElementsTemperature Coefficient…

Vaporesso Attitude 80W TC Starter Kit - What''s Included:1 x Vaporesso Attitude Starter Kit1 x 0.5 ohm Clapton Traditional Coil1 x 4ml Glass Segment Reservoir Extender1 x Spare O-Ring Kit1 x Micro USB Cable1 x User ManualSpecs & FeaturesSingle High Amp 18650 Batteries - Not IncludedMaximum Wattage Output : 5-200WTemperature Control Range: 280-600FMin Atomizer Resistance: 0.05ohmVaporesso OMNI Board ChipsetSupport Nickel, Titanium, and Stainless Steel Heating ElementsTemperature Coefficient…

Heating, Cooling and Natural Gas Apps for iPhone | Natural Gas Pipe Size 2.2 For installers and engineers, this is a natural gas installation planning app for iPhone & iPad. Easy to use, fast and accurate. Customizable gas heating value, working pressure & temperature and location altitude. Predefined fittings & valves with their respective minor pressure loss coefficients. Pipe material can be selected from the list. Start with heat output and enter pipe length. Define pipe material and…

Heating, Cooling and Natural Gas Apps for iPhone | Natural Gas Pipe Size 2.2 For installers and engineers, this is a natural gas installation planning app for iPhone & iPad. Easy to use, fast and accurate. Customizable gas heating value, working pressure & temperature and location altitude. Predefined fittings & valves with their respective minor pressure loss coefficients. Pipe material can be selected from the list. Start with heat output and enter pipe length. Define pipe material and…

Pinterest
Search