How to use an Arduino to read the signal from a set of digital callipers and send the reading over USB. Why? This might be useful for accurate position sensing in home made / hacked computer aided manufacture systems. Adds USB functionality to your callipers. A great reference on reading digital callipers can be found at: http://www.shumatech.com/support/chinese_scales.htm What this instructable adds to the shumatech tutorial is: How to use an Arduino to read the call...

Reading Digital Callipers With an Arduino / USB

How to use an Arduino to read the signal from a set of digital callipers and send the reading over USB. Why? This might be useful for accurate position sensing in home made / hacked computer aided manufacture systems. Adds USB functionality to your callipers. A great reference on reading digital callipers can be found at: http://www.shumatech.com/support/chinese_scales.htm What this instructable adds to the shumatech tutorial is: How to use an Arduino to read the call...

Common 3.5mm 1/8 inch audio jacks and their pinouts: | TechnoSyndicate

Common 3.5mm 1/8 inch audio jacks and their pinouts:

Common 3.5mm 1/8 inch audio jacks and their pinouts: | TechnoSyndicate

Digital camera control using Arduino USB Host Shield

Digital camera control using Arduino USB Host Shield

Reading Digital Callipers with an Arduino / USB

Reading Digital Callipers With an Arduino / USB

Reading Digital Callipers With an Arduino / USB: 4 Steps

Picture of Make a USB iPhone iPod Charger On The Cheap!

Make a USB IPhone IPod Charger on the Cheap!

Arduino USB

Arduino USB

Arduino Usb,Arduino Projects,Raspberry

LilyPad Arduino USB - ATmega32U4 Board

LilyPad Arduino USB - ATmega32U4 Board

This tiny USB dev board made by Digistump has a huge amount of potential despite its low pin count and limited RAM. The brains of the operation is the ATtiny85, a cheap, 8 pin, 8 bit microcontroller. What really makes this board interesting is the USB functionality. You can program it using the Arduino IDE and...

This tiny USB dev board made by Digistump has a huge amount of potential despite its low pin count and limited RAM. The brains of the operation is the ATtiny85, a cheap, 8 pin, 8 bit microcontroller. What really makes this board interesting is the USB functionality. You can program it using the Arduino IDE and...

Modern LED Desk Lamp...Powered by 5V USB

Modern LED Desk Lamp...Powered by 5V USB

Arduino USB

Arduino USB

Arduino Usb

Pinterest
Search