Gear train

126 Pins
·5y
a machine that is sitting on top of a black table with a white clock in the middle
Fast and Fresh
Squareness comparator I finished building today. I was planning to use 1/2” steel ball bearings for the feet and face but didn’t I didn’t have any in stock. Impatience caused me to improvise! I put a slight radius on some steel rod with my radius turning tool and sanded with progressively finer grit until I got the finish I wanted, then parted off at 1/2”. Reamed holes at .499” then discovered the stock I used is slightly undersized anyways, so had to cement the ...
a machine that has some metal parts on it's side and is turning to the right
Collet Holding Block
Picture
the machine is working on the metal part with it's chucking tool in place
Collet Holding Block
Picture
two silver and brown boxes sitting on top of a green tablecloth covered floor next to each other
Collet Holding Block
Picture
a machine that has some sort of tool on it
Collet Holding Block
Picture
a machine that has some metal parts on it's side and is turning to the right
Collet Holding Block
Picture
a wooden cutting board sitting on top of a table next to a knife and pepper shaker
Collet Holding Block
Picture
the tools are sitting on the table ready to be used
Collet Holding Block
Picture
a machine that has some metal parts on it
Collet Holding Block
Picture
an open box containing a knife and a sharpener on a white tablecloth with a black handle
Collet Holding Block
Picture
a machine that is sitting on top of a green table with some sort of tool in it
Collet Holding Block
Picture
a machine that is working on some kind of thing
Collet Holding Block
Picture
a metal object sitting on top of a white surface
Collet Holding Block
Picture
a drill is being used to make holes in the wall with metal parts on it
Collet Holding Block
Picture